Flanged Only Tank Head technical overview.
Flanged Only Tank Head from JINYI is specified by its application, material and connection or drawing requirements. Review the selection schedule and enquiry requirements below to prepare a quotation for your project.
On this page
Specification basis: The schedule below distinguishes industry geometry from order-specific requirements. Final dimensions, performance and price are defined in the approved quotation and drawing. Photographs identify the product family.
What is a flanged only tank head?
A flanged only tank head combines a substantially flat central portion with a formed peripheral flange or turned edge. Here flange describes the formed rim, rather than automatically identifying a drilled pipe flange connection.
Key dimensions and installation fit
A flanged-only head has a flat central area with a formed peripheral transition and flange. It differs from a plain flat disc and from a dished crown. Specify knuckle radius, flange height, shell fit and finished wall rather than assuming one universal size. Compare related configurations: flat circular tank cover, dished only tank head.
How to specify the flanged only tank head
Provide the central diameter, flange height, corner radius, thickness and edge preparation. Show whether the rim is intended for welding, locating or another attachment. If a bolted sealing flange is required, its drilling and gasket detail must be separately defined.
State whether the vessel interface uses inside or outside diameter. Define crown shape, dish depth, straight flange, wall thickness and edge preparation independently. Vessel pressure, temperature, vacuum, corrosion allowance, forming thinning and openings affect the final design; shape dimensions alone do not give a working-pressure rating.
Technical data for the flanged only tank head
| Central profile | Flat centre with formed peripheral edge |
|---|---|
| Knuckle radius | To the ordered profile drawing |
| Straight flange | To shell fit-up and joint drawing |
| Overall height | From the complete formed edge geometry |
| Diameter basis | State inside or outside diameter explicitly |
| Thickness | Minimum finished thickness to design; forming allowance separate |
| Material | Exact grade and supplied condition to the vessel specification |
| Edge preparation | Bevel, root face and fit-up to the joint drawing |
| Inspection | Profile, ovality, minimum wall and agreed examination |
Sizes and dimensional requirements
Use the named standard for standardized interfaces and the controlled drawing for custom dimensions. Confirm units, diameter datums, minimum finished thickness and any mating-component requirements. A catalogue dimension is not a universal tolerance, capacity or pressure rating.
Dimensions and tolerance schedule
| Individually toleranced features | Limits and datum system on the approved drawing |
|---|---|
| General tolerances | Standard, edition and class apply only when specified |
| Formed-head acceptance | Profile, ovality and minimum finished wall to vessel specification |
Individually toleranced dimensions and functional requirements take precedence over a general tolerance note. Specify the governing standard and acceptance method in the order documents; a tolerance shown by another manufacturer does not establish JINYI manufacturing capability.
Materials, inspection and documentation
Inspect the interface diameter, profile, dish depth, straight flange and minimum finished wall thickness against the vessel drawing. Check openings and edge preparation separately. Specify material traceability, forming records and examination where required. Keep the design code and drawing revision with the ordered component.
State the exact material designation and supplied condition, the controlled drawing revision and the required inspection reports before ordering. Separate material certification from dimensional checks and functional or pressure testing. Agree the acceptance limits for the ordered component and identify any additional witnessing, marking or packing requirements. Use technical help to prepare the drawing, material and inspection questions for review. Use the custom manufacturing and OEM guidance to define the drawing, material and inspection scope.
Installation and handling guidance
Check rim roundness, height and its transition to the centre plate. Align the rim with the shell or mating assembly before fixing. A formed edge should not be forced into alignment beyond the agreed fit-up limits.
Where the flanged only tank head is used
- Tank fabrication. Drawing-defined ends and covers matched to the shell interface.
- Vessel manufacture. Formed components selected through the complete vessel design.
- Equipment repairs. Replacement geometry, openings and edge details checked against the existing assembly.
How to order a flanged only tank head
Send the required configuration, material, quantity, destination and controlled drawing to JINYI. Identify changed dimensions, mating components, operating conditions and inspection scope. For a repeat order, include the previous approved revision and state any changes. The final quotation defines the supplied geometry, documentation, price and delivery terms.
Quantity prices and order preparation
| 1–9 pcs | US$125.00 / piece |
|---|---|
| 10–49 pcs | US$125.00 / piece |
| 50+ pcs | US$125.00 / piece |
Indicative budget pricing selected from public supplier listings. Selected upper amount from the related US$25–125 flat-head family listing. Flange height, knuckle, thickness and diameter require quotation. Linmei flat/flanged-head catalogue. Final JINYI pricing depends on the confirmed specification, quantity, inspection and delivery scope. Quantity-specific terms are confirmed with the final quotation.
Engineering and pricing references
Slawinski formed flat-bottom geometry. These sources explain the named product geometry or selection method. Their certifications, rated capacities and manufacturing capabilities belong to the named organizations.
Other JINYI products worth comparing
Review the tank manhole covers catalog for adjoining components, connection choices and alternative product forms.
Request a flanged only tank head quotation from JINYI with the drawing, material and quantity required for your project.
Flanged Only Tank Head selection and quotation checklist
The flanged-only profile has a flat central area with its specified edge transition. Identify the knuckle and straight flange dimensions instead of substituting a fully dished head. Use the photographed product form to identify the arrangement, then use the controlled drawing to define what will be supplied. Similar-looking components can have different end details, load paths or maintenance requirements.
Flanged Only Tank Head dimensions and tolerances
The first comparison for this flanged only tank head is flat crown and flange geometry. Mark the dimensions that control mating, alignment and installation space on the enquiry drawing. Give units for every value and identify the datum from which it is measured. If a dimension is critical, specify its individual tolerance and measurement method rather than relying on a general tolerance note.
A flanged-only head has a flat central area with a formed peripheral transition and flange. It differs from a plain flat disc and from a dished crown. Specify knuckle radius, flange height, shell fit and finished wall rather than assuming one universal size. Review the selection schedule together with the final drawing and inspection requirements.
Prepare the material and interface information
For a flanged only tank head enquiry, identify the required material designation and supplied condition. Describe the mating components, attachment method and environment. Include the operating temperature and any relevant pressure, movement or structural load. These inputs should describe the actual installation, including changes between normal operation, start-up and maintenance where applicable.
Specify coatings, surface finish and marking separately from the base material. If traceability is needed, identify the record required and how it must correspond to the delivered component. Agree whether inspection covers dimensions, material documentation, welds or functional testing; these are different checks with different acceptance criteria.
Custom flanged only tank head quotation
Attach the latest drawing revision, required quantity and delivery destination when contacting JINYI. Highlight departures from the illustrated arrangement, including changed dimensions, connections, finish and packing. For repeat orders, reference the approved configuration and list changes explicitly so an earlier drawing is not assumed to remain current.
Compare quotations using the same geometry, grade, supplied condition, unit of supply and inspection scope. A piece, a segment and a complete assembly can represent different quantities. Confirm quantity discounts and delivery terms with the final quotation.
Compare related component arrangements
Evaluate this flanged head by its actual flat crown and flange geometry and the required tank head arrangement. The photographs below show separate JINYI products for comparison. They are linked to their own technical pages and are not additional gallery views of this flanged only tank head.
| Photo | Related product | Selection detail |
|---|---|---|
 | Dished Only Tank Head | Cap depth and attachment edge. Compare this separate product when the drawing requires its particular arrangement. |
 | Flat Circular Tank Cover | Cover thickness and edge preparation. Compare this separate product when the drawing requires its particular arrangement. |
 | Shallow Dished Tank Head | Shallow profile and crown radius. Compare this separate product when the drawing requires its particular arrangement. |
Questions to resolve before ordering
Which dimensions need checking first?
Start with flat crown and flange geometry and the mating or mounting detail. Check nominal designations against measured dimensions, then review the installation envelope. Photographs help identify the form; the drawing provides the dimensional basis for acceptance.
What should the quotation include?
A flanged only tank head quotation should identify the configuration, drawing revision, material, quantity, price basis and agreed inspection records. Keep these details together with the approved order so receiving inspection can compare the delivered product with the specified component.
Independent terminology reference
DVAI tank head profile families provides an independent reference for component terminology. Use the specified standard and edition where required by the project. This link does not establish JINYI certification, product approval or interchangeability with another manufacturer.
- Spec
- Defined configuration
- Grade
- Material requirement
- US$125.00
- Indicative unit price
- 3
- Quantity bands
- Product arrangement — Flanged-only head
- Engineering selection — A flanged-only head has a flat central area with a formed peripheral transition and flange. It differs from a plain flat disc and from a dished crown. Specify knuckle radius, flange height, shell fit and finished wall rather than assuming one universal size.
- Quotation scope — Material, drawing revision, quantity, inspection and delivery terms confirmed together
At a glance
- Product form
- Flanged-only head
- Central profile
- Flat centre with formed peripheral edge
- Knuckle radius
- To the ordered profile drawing
- Straight flange
- To shell fit-up and joint drawing
- Pricing
- Indicative USD pricing
| Central profile | Flat centre with formed peripheral edge |
|---|---|
| Knuckle radius | To the ordered profile drawing |
| Straight flange | To shell fit-up and joint drawing |
| Overall height | From the complete formed edge geometry |
| Diameter basis | State inside or outside diameter explicitly |
| Thickness | Minimum finished thickness to design; forming allowance separate |
| Material | Exact grade and supplied condition to the vessel specification |
| Edge preparation | Bevel, root face and fit-up to the joint drawing |
| Inspection | Profile, ovality, minimum wall and agreed examination |
| Individually toleranced features | Limits and datum system on the approved drawing |
|---|---|
| General tolerances | Standard, edition and class apply only when specified |
| Formed-head acceptance | Profile, ovality and minimum finished wall to vessel specification |
