Spring Pipe Hanger technical overview.
Spring Pipe Hanger from JINYI is presented in the Variable spring · suspended configuration. Use the dimension schedule, connection details and inspection requirements below when comparing this product with your pipework or equipment drawing.
On this page
What is a spring pipe hanger?
A spring pipe hanger suspends a specified pipe load while allowing the vertical travel required by the support design.
Key dimensions and installation fit
The spring support accommodates vertical pipe movement while carrying load. Specify the cold and operating loads, required travel and mounting arrangement together. A base-mounted unit and a suspended hanger use different attachments even when they belong to the same spring family. For a constant spring arrangement with a horizontal installation envelope, review the horizontal constant spring hanger against the support schedule.
How to specify the spring pipe hanger
Select a spring size from its load-versus-travel data rather than using the complete series load range as one unit rating. The selected travel class is a movement category; the full series offers several travel options. Variable and constant spring supports use different performance criteria and should not be substituted without a piping-support review.
Technical data for the spring pipe hanger
| Mounting type | B / C |
|---|---|
| Series load range | 0.059–248.89 kN |
| Travel options | 30 / 60 / 85 / 120 / 170 mm |
| Selected travel class | 60 mm |
| Series size positions | 0–23 |
| Maximum load variability | 25% |
Sizes and dimensional requirements
The dimensional schedule identifies the illustrated configuration. Compare each value with the mating pipe, equipment or support drawing. A nominal designation does not replace the actual connection diameter, installation envelope or mounting detail. The choices above let you include a different configuration with your quotation request.
Dimensions and tolerance schedule
| Load variability limit | 25% maximum |
|---|---|
| Machined features >30–120 mm | ±0.3 mm |
Inspection, standards and documentation
Confirm installation setting, movement direction, attachment detail and travel indication. Record the cold and hot settings in the support schedule. Review load variability over the actual required travel and provide the operating and test-load information needed for the final selection.
State the required product standard and edition, material records and inspection acceptance criteria before ordering. Where pressure, temperature, movement or load are relevant, provide the operating and test conditions together. Document requirements should identify the actual component and drawing revision; a general certificate does not replace a dimensional or material record for the ordered item. Use the pipe support and casing manufacturing guidance to confirm fabrication and inspection requirements.
Where the spring pipe hanger is used
- Thermal movement support. Provide the cold and hot loads together with the required movement direction.
- Suspended or base-supported piping. Match the support configuration to the structural attachment and available clearance.
- Pipe support schedules. Record the spring size, travel class and installation setting for each location.
How to order a spring pipe hanger
Select the required options and send the quantity, destination, material and controlled drawing to JINYI. Include changed dimensions, mating details, finish, marking and packing requirements. The quotation defines the final configuration, inspection scope and delivery terms so the component can be checked against the intended installation.
Quantity prices and order preparation
| 1–49 sets | US$10.00 per set |
|---|---|
| 50–199 sets | US$9.50 per set |
| 200 sets and above | US$9.00 per set |
Freight and taxes are quoted separately. A different material, size or drawing can change the price and delivery requirements. Confirm the agreed specification before manufacture, and keep the drawing revision, selected options and ordered quantity together in the enquiry.
Other JINYI products worth comparing
Compare insulated pipe support, clamp pipe shoe, or review the pipe supports and hangers catalog for other connection and configuration choices.
Request a custom spring pipe hanger quotation from JINYI with the drawing and quantity required for your project.
Spring Pipe Hanger selection and quotation checklist
The hanger carries the load from above. Identify the suspension arrangement and cold-to-hot movement as well as the working load; a travel class alone is not a complete selection. Use the photographed product form to identify the arrangement, then use the controlled drawing to define what will be supplied. Similar-looking components can have different end details, load paths or maintenance requirements.
Spring Pipe Hanger dimensions and tolerances
The first comparison for this spring pipe hanger is spring travel and hanging load. Mark the dimensions that control mating, alignment and installation space on the enquiry drawing. Give units for every value and identify the datum from which it is measured. If a dimension is critical, specify its individual tolerance and measurement method rather than relying on a general tolerance note.
The current schedule identifies mounting type: B / C; series load range: 0.059–248.89 kN; travel options: 30 / 60 / 85 / 120 / 170 mm. Read these entries together with the configuration and tolerance tables above. Reference or example values describe the displayed arrangement; the approved JINYI quotation and drawing define the ordered component. A different interface, material or service condition needs a fresh comparison.
Prepare the material and interface information
For a spring pipe hanger enquiry, identify the required material designation and supplied condition. Describe the mating components, attachment method and environment. Include the operating temperature and any relevant pressure, movement or structural load. These inputs should describe the actual installation, including changes between normal operation, start-up and maintenance where applicable.
Specify coatings, surface finish and marking separately from the base material. If traceability is needed, identify the record required and how it must correspond to the delivered component. Agree whether inspection covers dimensions, material documentation, welds or functional testing; these are different checks with different acceptance criteria.
Custom spring pipe hanger quotation
Attach the latest drawing revision, required quantity and delivery destination when contacting JINYI. Highlight departures from the illustrated arrangement, including changed dimensions, connections, finish and packing. For repeat orders, reference the approved configuration and list changes explicitly so an earlier drawing is not assumed to remain current.
The three price tiers above organise the displayed quantity bands. Compare quotes using the same drawing, material, inspection scope and unit of supply. A piece, a segment and a complete assembly are different units where applicable. Confirm freight, taxes, documentation and delivery terms with the final quotation instead of inferring them from the displayed unit price.
Compare related component arrangements
Evaluate this spring hanger by its actual spring travel and hanging load and the required pipe hanger arrangement. The photographs below show separate JINYI products for comparison. They are linked to their own technical pages and are not additional gallery views of this spring pipe hanger.
| Photo | Related product | Selection detail |
|---|---|---|
 | Base Mounted Spring Support | Spring travel and cold-hot loads. Compare this separate product when the drawing requires its particular arrangement. |
 | Horizontal Constant Spring Hanger | Horizontal layout and working travel. Compare this separate product when the drawing requires its particular arrangement. |
 | Compact Constant Spring Support | Installation height and working travel. Compare this separate product when the drawing requires its particular arrangement. |
Questions to resolve before ordering
Which dimensions need checking first?
Start with spring travel and hanging load and the mating or mounting detail. Check nominal designations against measured dimensions, then review the installation envelope. Photographs help identify the form; the drawing provides the dimensional basis for acceptance.
What should the quotation include?
A spring pipe hanger quotation should identify the configuration, drawing revision, material, quantity, price basis and agreed inspection records. Keep these details together with the approved order so receiving inspection can compare the delivered product with the specified component.
Independent terminology reference
LISEGA pipe support selection families provides an independent reference for component terminology. Use the specified standard and edition where required by the project. This link does not establish JINYI certification, product approval or interchangeability with another manufacturer.
- B / C
- Mounting type
- 0.059–248.89 kN
- Series load range
- 25% maximum
- Tolerance
- 3
- Quantity tiers
- Variable load — A spring support changes force as the pipe moves.
- Paired inputs — Select using both the required operating load and travel.
- Installation setting — Identify hot and cold positions and the required test condition.
At a glance
- Product
- Spring Pipe Hanger
- Configuration
- Variable spring · suspended
- Mounting type
- B / C
- Series load range
- 0.059–248.89 kN
- Travel options
- 30 / 60 / 85 / 120 / 170 mm
Dimensions and technical specification
| Parameter | Specification |
|---|---|
| Mounting type | B / C |
| Series load range | 0.059–248.89 kN |
| Travel options | 30 / 60 / 85 / 120 / 170 mm |
| Selected travel class | 60 mm |
| Series size positions | 0–23 |
| Maximum load variability | 25% |
